Search Results

THE Navy Department established the Naval Aircraft Factory (a) to assure a part, at least, of its aircraft supply; (b) to obtain cost data for the Department's guidance in dealing with private manufacturers, and (c) to have under its own control a factory capable of producing experimental work. The history of this development is given in some detail, including statistics of size, valuations and output.

The engine-fuel situation has changed almost overnight. Oil-consuming activities have taken on an accelerated expansion and the situation has shifted from excess supply to a position where demand is assuming the lead and is seeking a supply. A gasoline stringency, accompanied presumably by a marked rise in price, is a prospect to be anticipated. The production of gasoline is increasing more rapidly than the production of its raw material, crude petroleum. The available supply of the latter is very limited in view of the size of the demand. As a direct result of the situation, gasoline is changing in character and becoming progressively less volatile. The low thermal efficiency of the prevailing type of automotive apparatus contributes strongly to the demand for gasoline as engine fuel and has a bearing upon the quantity and the price of this specialized fuel.

In a rapid and illuminating sketch of the early work done in electricity and magnetism the subtle and close connection between pure research and so-called industrial research is shown. Building on the work of Faraday, Maxwell and Hertz, Marconi, in our day, had the confidence to do the practical thing. From the Hertz oscillating system he passed to grounded antennas at both sending and receiving stations. From the well-understood tuning of electrical circuits and the coherer of Professor Branly he secured increased efficiency and selectivity. Mr. Edison, following the early work of J. J. Thomson at Cambridge University, England, devised the first practical application of the electron apparatus, the Edison relay. The vacuum tube became in the radio field an amplifier, an oscillator and a modulator, the audion. In addition to these interesting developments are the Poulsen arc, the Alexanderson alternator and other alternators of German design.

Manufacturers of carbureters and ignition devices are called upon to assist in overcoming troubles caused by the inclusion of too many heavy fractions in automobile fuels. So far as completely satisfactory running is concerned, the difficulty of the problem with straight petroleum distillates is caused by the heaviest fraction present in appreciable quantity. The problems are involved in the starting, carburetion, distribution and combustion. An engine is really started only when all its parts have the same temperatures as exist in normal running, and when it accelerates in a normal manner. Two available methods, (a) installing a two-fuel carbureter, using a very volatile fuel to start and warm-up the engine, and (b) heating the engine before cranking by a burner designed to use the heavier fuel, are described and discussed.

THE production of gasoline in this country could be increased through the following changes in refinery practice: (1) Universal adoption of a high “end-point,” or upper volatility limit for gasoline (2) General use of more efficient distillation methods and equipment (3) Recovery of gasoline now lost in refinery operation (4) Wider use of cracking processes Other possible methods of increase are not considered of sufficient importance to merit discussion in this connection. Some of the details of the four methods of increase are discussed and it is estimated on the basis of the evidence now at hand that the maximum percentage increases in production under the four heads listed are as follows: (1) 15 to 20 per cent; (2) 10 per cent; (3) 10 per cent, and (4) 100 per cent.

After noting that the early development of the automobile industry took place at a time when gasoline was a drug on the market, this paper reviews the cycle of operations of a standard gasoline engine in order to point out its limitations and the possibilities of utilizing a less volatile fuel than gasoline and of securing lower consumptions of fuels of all kinds. Compression and expansion limitations and the reduction of mean effective pressures at light loads are considered. Disadvantages of throttling control are pointed out, citing as a parallel example the trend of steam engine design away from this means of control. The author then outlines the advantageous features of the improved Diesel engine design, and by means of curves shows the great fuel economy of this type as compared with gasoline engines. He concludes by defining “the ideal tractor engine.”

The author first compares mineral oils with certain other liquids in order to point out clearly certain of their characteristics. He then shows the economic benefits that would result from making more of the crude available for use as fuels. He discusses such topics as cracking methods in use, advantages of dry gas, initial flame propagation, gas producers, hot mixtures, wet mixtures and difficulties of correcting existing engines. He concludes by proposing as a solution of the gasoline problem the more general use of superheated homogeneous fixed dry gases made in vaporizing devices independent of engine cylinders, and outlines means for attaining this end. Performance data covering the use of mixtures of kerosene and gasoline on several cars are included in a table, and several charts throughout the paper illustrate many of the topics discussed.

The author states that the objects of the paper are to define and trace the development of the various processes of carburetion, and to offer such suggestions along these lines as may assist the investigator in developing motorboats, automobiles and self-contained unit motor cars for railway purposes. The surface carburetor is mentioned chiefly as of historic interest. In considering the jet carbureter the author discusses the proportion of gas desired, the effect of the varying inertia of the air and the liquid gasoline and the breaking up of the combustible needed. Following sections review the devices for using kerosene, such as gasoline jet carbureters to which heat is applied, devices of the fixed gas type, the introduction of combustible directly into the cylinder, forcing combustible directly upon a hot surface in the cylinder and devices which raise the combustible to the boiling point.

This paper emphasizes the importance of using standardized testing equipment in order that mental calculations may be avoided in interpreting the reports of other engineers. The situation and environments of the engine-testing plant, cooperation among the men conducting tests, standardized methods of conducting tests, value of venturi meters and testing of accessories are among the subjects discussed in the first part of the paper. The subject of the testing of engine cooling systems is treated at some length, the importance of obtaining operating conditions being emphasized. The paper concludes with two sections covering spark-plug testing and tests for preignition.

The results are given of laboratory investigations made of a number of different types of carbureters, showing the relation between their gasoline and air consumptions over a wide range. This relation is plotted on so-called quality diagrams, on which is indicated the range between which high power and high efficiency can be expected. A description is given of a carbureter arranged in two stages, the first being used at light load and the second coming into action when the throttle is nearly open, thereby more than doubling the carbureter capacity. Engine performance curves are presented showing the result when only one or both stages of this carbureter are used.

This paper is mainly an argument in favor of the use of large, single rear wheel truck tires instead of smaller dual tires. Although the practice of using large singles is comparatively new, the author gives the results of experience and research to show the advantages of the newer method of rear tire equipment. In developing his arguments in favor of single tires, the author goes into the history of dual tire application to show why it was necessary to use two tires in the earlier days of truck operation. As the necessity for increased carrying-capacity grew, tire manufacturers found the then existing single tire equipment inadequate, and they set about to develop suitable equipment to meet the new condition, the result being dual practice. The method of attaching the earlier dual tires is shown to have been poor, resulting in circumferential creeping of the whole tire to a much greater extent as the width of the dual equipment increased.

The author outlines the factors leading to the present high cost of automobile fuel, states that the introduction of new distillation processes will not solve the problem, but that the development of kerosene-utilizing appliances will produce results satisfactory to everybody. It is stated why kerosene cannot be used on the present gasoline cars. The adaptation of the gasoline automobile engine to the use of heavier fuels than will vaporize without the use of heat is entirely a problem of heating and heaters. The author reviews at length the principles embodied in and the construction of the heated vaporizers or vaporizing heaters now used in stationary and traction kerosene engines and in alcohol engines, giving illustrations of a number of such devices. After thus developing what in his opinion are desirable and good principles, the author describes a form of vaporizer embodying such principles, which he states has had successful trials (both block and road) in automobile service.